BMW / Mini Cooper F-Series FEM / BDC Steering Lock Emulator (F2x, F3x, F15, F16, F4x, F5x) No Programming Required – Plug & Play Solution

New steering lock emulator for BMW and Mini Cooper F-series vehicles equipped with FEM or BDC modules. Compatible with most F-series models from 2012 onward. No programming or adaptation needed – simply plug in and start the car.

Key Features:

• No programming required

• Plug & Play installation

• Emulates original ELV / ESL module functionality

• Compatible with BMW F2x, F3x, F4x, F5x, F15, F16 and Mini Cooper F-Series

• Restores steering lock function in case of ELV failure

Specifications:

• Manufacturer: MK3

• Condition: New

• Weight: 40 g

• Product code: MK20222

Compatibility:

• BMW Mini Cooper F-Series with FEM / BDC module

• BMW F2x (1 Series, 2 Series)

• BMW F3x (3 Series, 4 Series)

• BMW F15, F16 (X5, X6)

• BMW F4x, F5x (other BDC-controlled models)

Functionality:

• The ELV is a common failure in the steering lock system – even with a working key, the car won’t start if the lock doesn’t disengage

• This emulator replaces the faulty steering lock module, eliminating the need for expensive replacement and programming

• Can be used as a diagnostic tool or as a permanent solution

• Connects to the original harness – no wiring modifications needed

• In some cases, fault codes must be cleared using a diagnostic tool

Installation Instructions:

1. Turn off the ignition

2. Remove the original 4-pin ELV connector

3. Plug the connector into the MK3 emulator

4. Start the car – the system will work automatically

Note:
In certain cases, vehicle access system codes or counters must be cleared using a diagnostic tool. This emulator is designed to replace a confirmed faulty ELV unit and emulate a working steering lock.